_1745823981883.webp)
uf ultrafiltration
Application:waste water treatment
Power consume:5.5kw/hour
Recovery rate: 80-90%
Operating pressure: 0.2-0.3Mpa
- Product Description
MR-UF-25TH UF Ultrafiltration System - Industrial Water Treatment Solution
The MR-UF-25TH uf ultrafiltration system represents Morui's cutting-edge membrane technology for industrial wastewater treatment. This machine can process 25 tons of material per hour and has an amazing 80–90% recovery rate while only using 5.5kW per hour. When used at the best pressures of 0.2 to 0.3 Mpa, our product solution separates molecules reliably for a wide range of commercial uses. This system guarantees consistent water quality performance and is backed by Morui's 19+ years of experience. It is trusted by 500+ business customers, such as Foxconn and BYD.
What Makes UF Ultrafiltration So Effective?
With holes that are between 0.001 and 0.1 microns in size, our product is a precise molecular screen. Semipermeable filters let your water pass through, but they also block some of it. Filters like these keep out dangerous substances while letting clean water and minerals pass through.
Pumping water against the cloth surface is done with hydrostatic pressure. You don't have to use chemicals to get rid of bacteria, viruses, floating solids, and loose particles. Because you keep the minerals that your processes need, the water is better.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Model | MR-UF-25TH |
| Processing Capacity | 25 tons/hour |
| Power Consumption | 5.5 kW/hour |
| Recovery Rate | 80-90% |
| Operating Pressure | 0.2-0.3 Mpa |
| Membrane Type | Hollow Fiber |
| Application | Industrial Wastewater Treatment |
| Control System | Automated PLC |
| Backwash Function | Automatic |
Industrial Applications You Can Count On
Pre-treatment for Reverse Osmosis Systems
Your RO membranes need protection from fouling and damage. Our system reduces Silt Density Index below 3, extending RO membrane life significantly. This saves you thousands in replacement costs.
Manufacturing Wastewater Treatment
Handle complex industrial effluents from textile, plating, and chemical processes. The system tolerates high organic loads while maintaining consistent output quality.
Process Water Recycling
Transform your wastewater into reusable process water. This reduces freshwater consumption and helps meet environmental discharge standards.
Why Choose Morui's UF Ultrafiltration Technology?
Proven Performance Record
With 500+ employees across 14+ branches, we've installed uf ultrafiltration systems for major manufacturers worldwide, and our annual sales exceed $200 million, reflecting customer trust in our solutions.
Advanced Membrane Technology
Our own factories are where we make PS, PES, and PEN membranes. This lets you get new parts and help with technical issues right away if you need it.
Complete System Integration
Grundfos pumps, GF tools, and other high-quality parts come with your system. We take care of the whole process, from planning to manufacturing to installation and start-up.
Energy Efficiency That Saves Money
The MR-UF-25TH only needs 5.5kW per hour to process 25 tons of water. Compared to thermal separation ways, this low energy need cuts your operating costs by a large amount.
Most of the time, your system works without adding heat or chemicals. This cuts down on energy costs and makes things easier for your team.
Maintenance Made Simple
Automatic Backwashing
The system performs scheduled backwashing cycles to maintain membrane performance. This removes accumulated particles and extends cleaning intervals.
Chemical Enhanced Backwash (CEB)
When standard backwashing isn't enough, automated CEB cycles restore membrane flux. The system alternates acid and alkali cleaning for optimal results.
Long Membrane Life
High-quality PVDF membranes typically last 5-7 years in industrial applications. Proper operation and maintenance maximize this service life.
Quality Control You Can Trust
Every membrane module undergoes rigorous testing before shipment:
- Bubble point testing verifies pore size consistency
- Pure water flux testing confirms permeability specifications
- Tensile strength testing ensures mechanical durability
- Molecular weight cut-off verification confirms rejection performance
Our ISO, CE, and ROHS certifications guarantee international quality standards.
Fast Delivery and Professional Support
We maintain over 15 production workshops across China. This means faster delivery times and immediate access to spare parts when you need them.
Standard delivery times:
- Consumables and membranes: 7 days
- Complete equipment: 20-35 days
Our engineers provide on-site installation and commissioning support. They'll train your operators and ensure optimal system performance from day one.
FAQ
Q: Can this system handle varying feed water quality?
A: Yes, our product maintains stable output despite feed water turbidity fluctuations. This makes it ideal for challenging industrial applications.
Q: What contaminants does it remove?
A: The system removes bacteria, viruses, suspended solids, colloids, and particles down to 0.001 microns. It preserves dissolved minerals and salts.
Q: How do I know when membranes need replacement?
A: Monitor transmembrane pressure and flux rates. When cleaning cannot restore performance to acceptable levels, membrane replacement is needed.
Contact Us
Contact us today at benson@guangdongmorui.com for your uf ultrafiltration custom water treatment solution.
